Ultralife “Hair & Sludge Removal System”
$41.99
Ultralife Hair and Sludge Removal System, you can now remove that contaminant quickly and safely, without harming your fish, the desirable micro-algae, corals or other reef inhabitants you may have.
- Description
- Additional information
- Instructions
- Reviews (0)
Description
Ultralife “Hair & Sludge Removal System”
You don’t have to suffer with ugly hair and sludge in your tank, destroying the beauty of the marine environment you created. Thanks to Ultralife’s Hair and Sludge Removal System, you can now remove that problem quickly and safely, without harming your fish, the desirable micro-algae, corals or other reef inhabitants you may have. It is easy to use, for the first-time treatment of the affected aquariums, simply place the required amount of the product into a filter bag, and then place it either in a filter canister or fast-moving part of your filter sump. After 24 hours turn off UV filtering, add the remaining pack ‘A’ material directly into the aquarium. 48 hours later, turn the UV filters back on, and after 2 weeks, clean out the hair and sludge during a 25% water change. Repeat the cleaning and water change very 2 weeks until the aquarium is free of buildup, and then simply remove the cleaner from the canister or sump. Used this way, this generously sized pack will treat 50 gallons of water.
For maintenance, simply add to the aquarium in a filter bag as above, wait 24 hours, turn off the UV filter and add pack ‘A’. After 48 hours, turn the UV filter back on. Remove and replace the filter material once a month to maintain a clean, clear aquarium. Used this way, this generously sized pack will treat 200 gallons of water.
Due to the nature of the product, keep out of reach of children.
This product is for Aquarium use only
Additional information
| Weight | 3 lbs |
|---|---|
| Dimensions | 12 × 6 × 6 in |
Directions: First Time Usage: Treats 50 Gallons 1. Vacuum out as much detritus, hair and sludge as possible. Replace any water that was removed. 2. Rinse 50% of the appropriate amount of the contents of all packages, except for package ‘A’, with cool fresh water to remove any dust. 3. Place the rinsed media into a filter bag. (Combining the contents of the packages or keeping them separate is your choice.) 4. Place the filter bag into a canister filter (recommended) or fast moving area of your filtration sump. 5. After 24 hours turn off UV filters and turn down your protein skimmer, so it does not foam over. Be sure to monitor your oxygen levels closely for any drop. Remedy if needed. 6. Following steps 2-4, place the remaining contents of the packages into your canister or sump. 7. Add the entire contents of package ‘A’, directly to your aquarium. 8. Wait 48 hours, turn UV filters on, and protein skimmer to normal operation. 9. After 2 weeks, vacuum out as much detritus, hair and sludge as possible. 10. At this time perform a 25% water change. 11. Repeat the vacuuming and water changes every 2 weeks until no longer needed, then remove the filter bags from your canister or sump. For Maintenance Usage: Treats 200 Gallons 1. Rinse the appropriate amount of the contents of all packages, except for package ‘A’, with cool freshwater to remove any dust. 2. Follow Steps 3-5 in the “First Time Usage” section above. 3. Add the appropriate amount of package ‘A’, directly to your aquarium. 4. Wait 48 hours, turn UV filters on, and protein skimmer to normal operation. 5. Remove and replace filter bag each month and repeat the maintenance steps as outlined above. Keep out of reach of children.
Only logged in customers who have purchased this product may leave a review.
You may also like…
Ultralife “Blue-Green Slime Stain Remover” (150Gal)
Ultralife “Blue-Green Slime Stain Remover” is a revolutionary time tested product, that will effectively and safely remove Blue Green Slime Stains from your freshwater aquarium.$16.99
Reviews
There are no reviews yet.